Welcome to Attusers.com

Admin

Troubleshooting and Error Recovery



Almost all RUU related errors can be recovered. When an error occurs, the utility will display an error message and provide recovery measures to allow you to continue with the update process.
After errors are recovered, do the following to continue with the update process:

1. Disconnect the device from the USB cradle/cable.
2. Reset the device.
3. Reconnect the device to the USB cradle/cable.
4. Check that the communication cradle/cable is connected properly.
5. Return to the ROM Update Utility to continue with the update.

If errors cannot be recovered, please refer to Q&A section for more details.

• ERROR [202, 204] : CONNECTION
• This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
• ERROR [206] : MEMORY ALLOCATION
  ERROR [280] : UPDATE ERROR
• When you see any of these error messages, close other running programs on the computer and run RUU again.
• ERROR [208] : FILE OPEN
  ERROR [210] : FILE READ
• These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
• ERROR [212] : FILE CREATE
  ERROR [214] : FILE WRITE
  ERROR [222, 224] : DEVICE NOT RESPONDING
• These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.
• ERROR [220] : MAIN BATTERY POWER
• This error message will appear when the device's battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).
• ERROR [238] : FILE READ
• This error message may appear when, for some unknown reason, the ROM image on the Mobile Device is corrupt. Download the whole RUU and try again.
• ERROR [240] : FILE OPEN
• When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
• ERROR [242] : INVALID LANGUAGE
  ERROR [244] : INVALID MODEL ID
  ERROR [294] : INVALID VENDER ID
  ERROR [296] : UPGRADE ONLY
• One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
• ERROR [246] : DEVICE NOT RESPONDING
• This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.
• ERROR [260] : UPDATE ERROR
• This error occurs when there is an "open port error" before upgrading the CE ROM image.
  
  Solution: You can reset the device and run RUU again. If you still encounter an "OPEN PORT ERROR" again, reset your computer and try again.
• ERROR [262] : UPDATE ERROR
• This error occurs during the CE ROM code upgrade process.
  
  Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
  
  Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
• ERROR [300] : INVALID UPDATE TOOL
• This error message will appear when you use the incorrect RUU version to upgrade.
• ERROR [330] : ROM IMAGE ERROR
• This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version to upgrade.

Q & A for RUU Upgrade

1. Q: Before calling the service center for help…
   A:Inform the service center about the error message (error no.) shown on the setup screen on the computer.
   • To view links in this forum your post count must be 1 or greater. Your post count is 0 momentarily.
2. Q: How long will it take for the verification process to finish?
   A: It will take about 1 minute, but it also depends on the speed of your computer.
   • To view links in this forum your post count must be 1 or greater. Your post count is 0 momentarily.
3. Q: What should I do if I see the progress bar turn red on the device?
   A: Do not do anything. This is normal as the RUU is adjusting itself to complete the process. You should not interrupt it by pulling the device out of the cradle unless being prompted.
4. Q: During the upgrade, the progress bar is moving. If the error message (ERROR [262] : UPDATE ERROR) appears, what should I do?
   A: This may occur when the connection is lost, without power supply, computer host is down, or due to other unexpected cases. You will see that there’s still one progress bar displayed on the device but it is not moving any more. The device cannot get into the Wince screen, so you cannot connect with ActiveSync. This problem usually can be recovered. You just need to follow the instructions in the error message box, reset the device, and run RUU again. RUU will re-flash the whole image again. Note: You should remove the battery and reset the device.
   • To view links in this forum your post count must be 1 or greater. Your post count is 0 momentarily.
5. Q: If I encounter ERROR [248~260] : UPDATE ERROR, what should I do?
   A: You can reset the device and run RUU again. If you still encounter the same ERROR again, reset the computer PC and try again.
6. Q: If I encounter ERROR [300] : INVALID UPDATE TOOL, what should I do?
   A: This error message will appear when you use the incorrect RUU to upgrade. Please make sure you use the correct RUU version to upgrade.
7. Q: If I encounter ERROR [220] : MAIN BATTERY POWER, what should I do?
   A: This error message appears when your device’s battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure your device has enough power to upgrade the radio.
   • To view links in this forum your post count must be 1 or greater. Your post count is 0 momentarily.
8. Q: I use RUU to update and failed, and my device always boots in three-color mode and cannot enter CE OS anymore, what should I do now?
   A: If the update process has failed, you will see that your device will always boot in three-color mode. It's normal and can be recovered. Please follow the instructions below to reset your device and to establish a connection with the computer.
   1. Disconnect your Mobile Device from the USB cradle/cable.
   2. Reset your Mobile Device.
   3. Reconnect your Mobile Device to the USB cradle/cable.
   4. Check that the communication cradle/cable is connected properly.
   5. Return to the ROM Update Utility.
   Note: You should ignore the ActiveSync connection.

__________________

Send Text Messages : Uploadz : Free DownLoads

joshwhite

This is really helpful. Thanks!